P2lean- Flexible bending solution
The P2lean is the ultimate Salvagnini panel bender, natively combining productivity, with its automatic bending and handling cycles, and flexibility, with its universal bending tools. Equipped with an automatic ABA blankholder, the P2lean doesn't require re-tooling and completes an average of 17 bends per minute.
It uses universal bending tools which automatically adapt in-cycle to the panel geometry, without machine down times or manual re-tooling, allowing batch-one or kit productions.
The technical solutions adopted (Direct Drive and pneumatic and electric drives) allow it to respect both people and the environment without reducing its productivity. It runs with just 22 l of long-life oil, inside a fully sealed circuit.
The integrated adaptive technologies (advanced sensors, bending formula, MAC2.0) make the system intelligent and able to automatically adapt to changes in the material and the external environment, eliminating waste and corrections, and extending the range of products that can be made.
The proprietary LINKS, VALUES and OPS software establish communication between the system and the company departments involved in the production flow.
The P2lean natively combines productivity, with its automatic bending and handling cycles, and flexibility, with its universal bending tools.
How to combine productivity and flexibility?
Conventional bending is characterized by an average OEE of 30%, and flexibility depends on the tool change system, which is often costly and time-consuming, with lower dynamics compared to panel benders, or on the installation of more than one press brake. The P2lean, on the other hand, natively combines productivity, with its automatic bending and handling cycles, and flexibility, with its universal bending tools.
How long does re-tooling take?
The P2lean doesn’t require re-tooling: the upper and lower blades, the counterblade and the blankholder are universal tools that are able to process the whole range of thicknesses and machinable materials. And with its advanced cycles, the P2lean completes an average of 17 bends per minute.
Do manual loading and unloading affect the total cycle time?
Loading and unloading are performed by the operator, who positions the sheet metal on the worktable and collects the product after bending. The P2lean's cycle minimizes the impact of these activities on total cycle time, as it allows the product to be unloaded after positioning the sheet on the worktable, thus combining two operations in a single action.
Does the P2lean's set-up affect productivity?
The set-up has minimal impact on the panel bender's productivity: when the program is loaded, the blankholder automatically adapts in masked time, and the manipulator gets into position for gripping and handling the sheet.
How to produce in kits or batch-one?
The P2lean is equipped with an automatic ABA blankholder, which adapts the length of the tool according to the size of the part to be produced, in-cycle, without machine down times or manual re-tooling: the ideal solution for batch-one and kit production.
How to make production independent of changes in material?
MAC2.0 is the set of integrated technologies – sensors, formulas and algorithms – that make the panel bender intelligent: it eliminates waste and reduces corrections, measuring in-cycle and automatically compensating any variability in the material being machined.
How to make production independent of external variations?
The P2lean integrates advanced sensors that measure the actual thickness and effective size of the part to be machined, and detects any deformations caused by variations in temperature. The data are fed in real time into the bending formula, which defines the correct force to apply to the sheet metal, guaranteeing the precision, repeatability and quality of the finished product.
How to adapt the panel bender to different production needs?
In addition to the automatic ABA blankholder, the P2lean offers a range of options to guarantee maximum versatility and adaptability, to suit any production strategy or mix.
How to make the process reactive to changes in the production lists?
The P2lean can be equipped with proprietary OPS software, which ensures communication between the panel bender and the factory ERP: depending on needs, OPS manages the production of sequences of different parts. Universal bending tools, automatic in-cycle set-up and automatic handling allow the system to respond to any requests immediately.
How to achieve maximum precision?
The sheet metal is centered, just once at the start of the process, against controlled reference stops: this minimizes the cycle time as well as any precision errors, which are all absorbed by the first bend. The bending formula automatically optimizes the bending parameters to reduce waste, while MAC2.0 detects and automatically compensates any variability in the material to guarantee precise, high-quality bends, reducing set-up times.